Gravel Driveway Cost in Indiana (2026 Price Guide)

How much does a gravel driveway cost in Indiana? New installs run $1,800–$8,000+; repairs $600–$3,000. See per-foot pricing, material costs, and examples.

Quick Answer

  • A new gravel driveway in Indiana typically costs $1,800–$8,000+, or about $1.50–$4.00 per square foot installed.
  • Gravel driveway repair and resurfacing usually runs $600–$3,000.
  • Delivered #53 limestone runs about $40–$60 per ton; a typical load covers 80–100 ft of driveway.
  • Mann Hauling installs and repairs gravel driveways across Central Indiana — free quotes at 317-206-0414.

A new gravel driveway in Indiana typically costs between $1,800 and $8,000 or more, which works out to roughly $1.50 to $4.00 per square foot installed. Gravel driveway repair and resurfacing usually costs $600 to $3,000. The biggest cost drivers are driveway length and width, how much base correction the existing ground needs, the stone used, and any culvert or drainage work at the road entrance.

Gravel Driveway Cost by Project Type

Typical Indiana gravel driveway pricing, 2026
ProjectTypical CostNotes
New driveway install (short, 50–100 ft)$1,800 – $4,000Subgrade + base + #53 surface
New driveway install (long, rural 200–400 ft)$4,500 – $8,000+More base correction & material
Resurfacing (fresh stone + grade)$800 – $2,500Re-crown and top existing drive
Pothole / rut repair$600 – $1,800Spot fixes and grading
Driveway widening$900 – $3,500Per added width and length
Culvert at entrance (add-on)$700 – $2,500Pipe, end sections, backfill

Gravel Driveway Material Costs

Most Indiana gravel driveways use a #2 limestone base for strength topped with #53 crushed stone, which compacts into a firm, well-draining surface. Pricing is by the ton, delivered.

MaterialDelivered CostUse
#53 crushed limestone$40 – $60/tonDriveway surface (most common)
#2 / #4 base stone$38 – $55/tonStructural base layer
#8 limestone$45 – $65/tonTop dressing, decorative
Crush-and-run (CR)$38 – $55/tonCompactable base/surface
Recycled concrete$25 – $45/tonBudget base layer

How to Estimate Gravel Driveway Cost

A useful rule of thumb: one ton of #53 stone at a 3-inch depth covers roughly 80–100 square feet. A 12-ft-wide driveway therefore uses about 1 ton every 8–10 feet of length for a fresh topping, and more for a full base build-up.

  • Measure length × width to get square footage.
  • For a fresh topping, plan ~1 ton per 80–100 sq ft at 3 inches.
  • For a new build, add a separate base layer (often 4–6 inches).
  • Add delivery, grading, and any culvert/drainage work.

Real Indiana Gravel Driveway Cost Examples

  • Example 1 — 80 ft x 12 ft fresh topping with grading, Avon: about $1,400.
  • Example 2 — New 250 ft rural driveway with base + #53 surface, Hendricks County: about $6,300.
  • Example 3 — Pothole and rut repair plus re-crown on a 150 ft drive, Plainfield: about $1,200.

Get an Exact Price for Your Project

Mann Hauling, Excavation & Land Clearing provides free, flat-rate quotes across Central Indiana. Veteran owned, licensed, and insured.

Frequently Asked Questions

Mann Hauling Service Area

Serving Central Indiana including Danville, Avon, Brownsburg, Plainfield, Mooresville, Monrovia, Martinsville, Pittsboro, Lebanon, Crawfordsville, and surrounding communities.

Mann Hauling & Excavation provides services throughout Central Indiana and does not currently serve projects outside Indiana.

We serve Hendricks County, Morgan County, Boone County, Putnam County, and surrounding Central Indiana communities. Hendricks County · Morgan County