Fill Sand Delivery in Central Indiana

What Is Fill Sand?

Fill sand is a coarse, granular material used to fill voids, level low areas, and bed pipes and structures. Unlike masonry sand, it isn't washed to a fine, uniform size — it's a workable fill product that compacts reasonably well, drains better than clay, and costs less than crushed stone for high-volume fill jobs. Across Central Indiana, fill sand is one of the most-ordered bulk materials for grading, backfill, and pre-construction prep.

Most Hendricks County job sites use fill sand somewhere in the build — under slabs, around foundations, in trenches, or as a base layer before stone. It's the workhorse fill material because it places easily, lets water move, and stays where you put it. When you order fill sand delivery from Mann Hauling, you get a consistent, clean fill product hauled straight from the yard, not a recycled mystery mix.

Common Uses for Fill Sand

• Backfill around foundations and footings — workable fill that lets water move instead of holding it against the wall.
• Pipe bedding — clean bedding under sewer, water, and drainage lines.
• Leveling and grading — filling low spots in yards, around new construction, or under poured slabs.
• Driveway sub-base in wet areas — used beneath a stone base where extra drainage is needed before laying #53 limestone.
• Sandbox, paver bedding, and pool base — bulk volume for residential projects.
• Trench backfill for utilities — water, sewer, gas, and electrical line trenches.
• Erosion repair and washout fill — bulk fill where soil has been carried off by storm runoff.
• Sitework and rough grading — pre-construction lot prep on new builds and additions.

Fill Sand vs. Masonry Sand vs. Stone

Three of the most-confused bulk materials in Central Indiana are fill sand, masonry sand, and crushed stone. Quick breakdown:

• Fill sand — coarse, unwashed, cheap. Best for bulk fill, backfill, bedding, and grading.
• Masonry sand — fine, washed, screened. Used for mortar, brick, and stucco — overpriced for fill work.
• #53 limestone — crushed stone with fines. Use for compactable driving surfaces. See our #53 stone delivery page.
• #8 limestone — washed clean stone. Use for drainage and pipe bedding when sand isn't enough. See our #8 stone delivery page.

For most Hendricks County backfill, leveling, and bedding jobs, fill sand is the right and cheapest call.

Coverage Per Load

Fill sand is sold by the ton and delivered by dump truck. Quick reference numbers for planning:

• ~1 cubic yard of fill sand ≈ 1.3–1.5 tons (about 1.4 tons as a working figure).
• ~1 ton spreads roughly 100 sq ft at 2 inches deep.
• ~10 tons fills a typical 200 sq ft area at about 8 inches deep — enough for a small foundation backfill or a slab prep pad.
• Most residential bedding and leveling jobs land between 3 and 15 tons per project.

Tell us the cubic yards or rough dimensions and we'll convert to tonnage and quote delivery in one call.

How Fill Sand Delivery Works

1. Call or quote — give us address, rough tonnage or cubic yardage, and where to dump.
2. Schedule — same-day or next-day for most local Hendricks County addresses.
3. Delivery — our dump truck pulls in, places the load where you point, and we confirm tonnage.
4. Spreading (optional) — for backfill or grading work we can pair the delivery with skid steer placement. Ask when you order.

Service Area

We deliver fill sand throughout Hendricks County and surrounding Central Indiana — Danville, Avon, Brownsburg, Plainfield, Pittsboro, Clayton, Coatesville, North Salem, Lizton, Mooresville, Monrovia, and Martinsville. Owner-operator service from our Danville yard means no broker markup and no surprise freight charges on top of your tonnage.

Related Services

• #53 limestone delivery — compactable base stone for driveways and pads.
• #8 limestone delivery — clean drainage stone for French drains and pipe bedding.
• Stone delivery hub — full aggregate list and coverage info.
• Gravel and limestone delivery — process, materials, and pricing context.
• Dump truck hauling services — for-hire jobsite hauling and material runs.
• Light excavation — site prep, trenching, and grading that ties into fill sand.