How much does it cost to install a driveway culvert in Indiana?

A residential driveway culvert in Indiana typically costs $700–$2,500 installed, including pipe, excavation, end sections, and stone backfill. Larger pipe and longer crossings cost more.

How much does culvert pipe cost per foot?

Culvert pipe runs about $10–$20 per foot for 12–15 inch HDPE, $18–$35 per foot for larger HDPE or corrugated metal, and $25–$60 per foot for reinforced concrete pipe.

What size culvert do I need for my driveway?

Most Indiana residential driveways use 12-, 15-, or 18-inch pipe sized to the ditch's peak flow. Undersizing causes flooding and washouts, so the pipe should match the ditch and any county requirements.

How much does it cost to replace a culvert?

Culvert replacement in Indiana typically costs $800–$2,800, slightly more than a new install because the old, often-crushed pipe must be excavated and removed before the new pipe is set.

Do you install and replace culverts in Central Indiana?

Yes. Mann Hauling installs new driveway culverts, replaces failed pipes, and builds ditch crossings throughout Central Indiana. Call 317-206-0414 for a free quote.

Culvert Installation Cost in Indiana

A driveway culvert in Indiana typically costs between $700 and $2,500 installed, which includes the pipe, excavation, end sections, and stone backfill. The culvert pipe alone runs roughly $10 to $30 per linear foot depending on diameter and material. Larger pipe, deeper ditches, longer crossings, and heavy clay or wet conditions push the total toward the high end.

Culvert Installation Cost by Project Type

Typical Indiana culvert pricing, 2026
Project	Typical Cost	Notes
New driveway culvert (residential)	$700 – $2,500	12–18 in pipe, 20–40 ft crossing
Culvert replacement	$800 – $2,800	Remove old pipe + reinstall
Long / wide crossing	$2,000 – $5,000+	Larger pipe, more backfill
Ditch crossing for field/lane	$1,000 – $3,500	Access for equipment/livestock
Headwalls / end sections (add-on)	$150 – $800	Flared ends or concrete walls

Culvert Pipe Material Costs

Pipe Type	Cost per Foot	Notes
HDPE (plastic) 12–15 in	$10 – $20/ft	Most common, light & durable
HDPE 18–24 in	$18 – $35/ft	Higher flow capacity
Corrugated metal (CMP)	$15 – $35/ft	Strong, traditional choice
Reinforced concrete pipe	$25 – $60/ft	Heavy loads, long lifespan

How Culvert Size Affects Cost

Culverts must be sized to carry the ditch's peak flow without backing up water or washing out the driveway. Most Indiana residential driveways use 12-, 15-, or 18-inch pipe. Undersizing a culvert causes flooding and repeated repairs, so proper sizing is part of the value of a professional install.

•Pipe diameter — larger pipe costs more per foot and needs more excavation.
•Crossing length — wider driveways need longer pipe and more backfill.
•Ditch depth & soil — deep, wet, or clay-heavy ditches add excavation time.
•End treatment — flared end sections or headwalls add cost but extend life.
•County permits — some entrances require a permit and inspected sizing.

Real Indiana Culvert Cost Examples

•Example 1 — New 24 ft x 15 in HDPE driveway culvert with stone backfill, Danville: about $1,300.
•Example 2 — Replace a crushed metal culvert with 18 in HDPE and flared ends, Avon: about $1,900.
•Example 3 — 36 ft ditch crossing with 18 in pipe for field access, rural Hendricks County: about $3,200.

Culvert Installation Cost in Indiana (2026 Price Guide)

Quick Answer

Culvert Installation Cost by Project Type

Culvert Pipe Material Costs

How Culvert Size Affects Cost

Real Indiana Culvert Cost Examples

Get an Exact Price for Your Project

Frequently Asked Questions

Related Services & Guides

Mann Hauling Service Area